设为首页|加入收藏|
分享到
收缩

浅谈汽车模具结构面自动编程

高 原
天津汽车模具股份有限公司 (天津 300308)
【摘要】 模具结构面编程主要内容有安装标准机构、 镶块的平面及导向立面、 定位面、 各种孔
等, 这些特征都是二维元素组成的, 加工刀轨一般是平面内的轨迹线。所以结构面编程主要
就是2D编程。介绍了结构面自动编程, 基于设计实体特征的数控编程技术, 不论是结构面
自动编程还是自动化程度更高的编程技术, 都要依赖于各种高端机械软件的支持。
关键词: 模具; 结构面; 编程
中图分类号: TG659 文献标识码: B
Discussion on the Automatic Programming
of Automobile Die Structural Plane
【Abstract】The main contents of the die structure programming include the installation of
standard mechanisms, the plane of the insert, the guide facade, the positioning surface, and
various holes. These features are all composed of two-dimensional elements. The machining tool
track is generally a trajectory in the plane. Therefore, structural surface programming is mainly
two-dimensional structure programming. The automatic programming of the structural plane
described in this article refers to the numerical control programming technology based on the
design features.Whether it is the automatic programming of structural planes or the more automated
programming technology, it depends on the support of various advanced mechanical software.
Keywords: die;structuralplane;programming

分享到

网站首页|版权隐私|使用协议|联系方式|关于我们|友情链接|网站留言
深圳市龙岗平湖华南城五金区M08栋128号 邮编:518111 联系电话:0755-89632112 89630393 联系传真:0755-89630823 83891333 E-mail:szmolds@163.com
版权所有:深圳市模具技术学会 未经许可 不可转载 粤ICP备14036094